English
• SLEEP mode operation
When the unit is cooling or drying and
operating in SLEEP mode, the target
temperature will gradually increase by
1°C per hour for two hours.
When the unit is heating and operating in
SLEEP mode, the target temperature will
gradually decrease by 1°C per hour for
two hours.
• Auto-restart function
If the network loses power, and if the unit
was in operation when the power cut
occurred, it will automatically restart
when the network regains power.
• T
urbo
mode operation
In Turbo mode, the air-conditioner runs at
its full capacity to cool down or heat up
the room temperature quickly. Press Turbo
button during COOL or HEAT mode to
enter Turbo mode operation. Press Turbo
button or MODE button to go back to its
previous operating mode.
Note: This mode runs continuously,
if you wish to conserve energy use
the Turbo mode sparingly.
• SURROUND
mode operation
In SURROUND mode, the air-conditioner
controls the rate of cooling or heating
with extra input of surrounding room
temperature from the remote controller.
The remote controller senses and sends
the surrounding temperature to the air-
conditioner once every 10 minutes. Press
the SURROUND button to activate mode
Press once more to disable SURROUND mode.
Note: The head of the remote controller
should face the air-conditioner so that
the SURROUND mode signal will be
reliably delivered to the air-conditioner.
GE_SAC_ENGL 01-02-2011 Page 10
1
0
