6
Remote control - Standard models
Remote controller
General remarks
• Be sure there are no obstructions
between the receiver and the remote
control unit. The unit has a range of
approximately 6 meters.
• Do not expose the remote control unit to
moisture, excessive direct sunlight or heat.
• Do not drop or throw the remote
control unit.
• When restarting, the unit resumes
operating on the last mode set before
shut down. The outdoor unit will restart in
approximately 30 seconds.
1. ON/OFF button
Press this button to turn the unit on or off.
2. MODE button
Select the desired mode of operation by pressing this
button. The unit can operate on: AUTO, COOL, DRY,
FAN or HEAT modes.
3. TEMP buttons
Press PLUS ( + ) or MINUS ( - ) button to set temperature
up or down. Temperature can be set from 16°C to 30°C
in COOL, DRY and HEAT modes.
GE_SAC_ENGL 01-02-2011 Page 8
6. TIMER button
When the unit is in off status, press TIMER button and
use the “+” and “-” buttons to select a delay start time
up to 24 hours in advance.
When the unit is turned on you may also set the time
for auto switch off by following the same process.
4. SWING button
Press to start louver moving automatically.
Press again to stop the louver moving.
7. SLEEP button
Press to set the sleep function.
Press once more to stop the sleep function.
5. FAN button
Press this button to change fan speed. There are four
speeds to choose from, or set the FAN to AUTO to let the
unit contr
ol the air flo
w.
