9
How to operate your
air-conditioner
(Inverter models starting "GAIRZ")
• AUTO mode operation
In AUTO mode, the
sensor automatically
controls the rate of cooling
and heating
of the room. If the room
temperature is
higher than 25ºC, the unit
will
automatically switch to COOL mode.
If the room temperature is lower than
20ºC, the unit will automatically switch to
HEAT mode.
• FAN mode operation
Use the FAN mode to ventilate air in the
room without cooling, heating or drying
the air. Use the FAN button of the remote
controller to set the fan speed.
• TIMER ON operation
When the unit is in off status, press TIMER
ON button to turn it on at the specified
time up to 24 hours in advance. Adjust
time with
"+" and "-"
buttons. Time changes
with 1 minute in
crements
each time
the
buttons are pressed. Time changes with
10 minute in
crements
when
the
buttons
are pressed for 2 seconds or longer.
Press TIMER ON button again to confirm
the TIMER ON time.
• TIMER OFF operation
When the unit is in operation,
press TIMER OFF button to turn it off at
the
specified time up to 24 hours in
advance.
Adjust time with
"+" and "-"
buttons.
Then, press TIMER OFF button again
to confirm the TIMER OFF time.
• COOL mode operation
The
sensor
automatically
controls
the rate of cooling. It adjusts the
operation
of the unit according to the
actual room
temperature and the desired
temperature.
If the room temperature is
higher than
the desired temperature, the
unit will cool
the air of the room. If the fan
speed is set
to
AUTO, the
sensor will control the
speed of the indoor fan
according to
the target temperature.
• HEAT mode operation
The
sensor
automatically
controls
the rate of heating. It adjusts the
operation
of the unit according to the
actual room
temperature and the desired
temperature.
If the room temperature is
lower than
the desired temperature, the
unit will heat
the air of the room. If the fan
speed is set
at AUTO, the
sensor will control the speed
of the indoor fan
according to the target
temperature.
• DRY mode operation
Use the DRY mode to both cool the air
and reduce the moisture contained in
the
air. The
sensor
automatically
adjusts the operation of the unit
according to the actual dryness and
temperature of the room, and according
to the desired temperature. If the room
temperature is higher than the target
temperature, the unit will both cool and
dry the air of the room. The fan goes to
low speed in DRY mode operation.
GE_SAC_
ENGL
01
-
02
-
2011
Pag
e
9
English
