4. Press
OK
at the system prompt.
5. Press
the
µ¶
keys to enter and navigate the command menu.
2.4 Selecting a menu option
•
Press
OK
to select a menu option and move forward in the menu structure.
•
Press
NO
to reject a menu option and move backwards in the menu structure.
•
Press
F1
to move through the second line of the LCD display, one word at a time,
from right to left.
•
Press
F3
to move through the second line of the LCD display, one word at a time,
from left to right.
2.5 Changing
a
menu option
The CSx75 has several editors that you can use to change the value of certain
programmable menu options. You can change selection list entries, binary entries, phone
numbers and text. This section describes how to change selection list entries, binary
entries, numeric entries and phone numbers. For information on changing text, see page
14.
2.5.1 Changing selection list entries
1. Navigate with the
µ¶
keys to the relevant menu option and press
OK
.
2.
The current value for the menu option is displayed, for example,
Enabled
.
3. Press
the
µ¶
keys to change the value, for example, change
Enabled
to
Disabled
.
4. Press
OK
to accept the change.
•
If the new value is valid, the keypad beeps once to confirm the change and
returns to the menu option.
•
If the new value is invalid, the keypad beeps three times to reject the change
and returns to the menu option.
5. Press
NO
to cancel the change and return to the menu option.
2.5.2 Changing
binary
entries
1. Navigate
with
the
µ¶
keys to the relevant menu option and press
OK
.
2.
The current value for the menu option is displayed, for example,
1 2 3 - - - - 8
means
that 1, 2, 3 and 8 are on (included) while 4, 5, 6 and 7 are off (excluded).
3.
Press the corresponding numerical key to change a value, for example, press
1
to
change the state of 1 to off and press
4
to change the state of 4 to on. The display
changes to
- 2 3 4 - - - 8
.
4. Press
OK
to accept the changes.
If the new values are valid, the keypad beeps once to confirm the change and
returns to the menu option.
If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
5. Press
NO
to cancel the changes and return to the menu option.
2.5.3 Changing numeric entries
1. Navigate
with
the
µ¶
keys to the relevant menu option and press
OK
.
2.
The current value for the menu option is displayed, for example, 55.
3.
Do one of the following:
Summary of Contents for CS5500
Page 1: ...CS875 575 275 175 Alarm system CS5500 Programming Manual September 2003 ...
Page 83: ......
Page 84: ...1045335 ...
