5 A
DVANCED PROGRAMMING
5.1 Multi-area
mode
You can program a keypad to act as a single-area keypad or a multi-area keypad by
default. A single-area keypad allows the user to arm one area only while a multi-area
keypad allows the user to arm one or more areas. A user with rights can change a single-
area keypad to a multi-area keypad and vice versa.
1. Navigate
with
the
µ¶
keys to
Multi-Area Keypad
and press
OK
.
•
Select
Enable
to set the keypad as a multi-area keypad by default.
•
Select
Disable
to set the keypad as a single-area keypad by default.
2. Press
OK
to save the setting.
3. The keypad beeps once to confirm the change and returns to
Multi-Area Keypad
.
5.2 Copying
zones
You can copy the settings for the current zone to another zone or a set of other zones. All
the zone settings (except the user defined zone name and RF settings) are copied to the
target zones.
1. Navigate
with
the
µ¶
keys to
Copy Zone
and press
OK
.
2.
The keypad prompts you to enter the start zone.
3.
Enter the number of the first zone to which the settings will be copied and press
OK
.
4.
The keypad prompts you to enter the end zone.
5.
Enter the number of the last zone to which the settings will be copied and press
OK
.
5.3 Modifying existing zone types
You can change the input type, name, attributes, sound and reporting features of an
existing zone type. The following steps describe how to change the input type.
1. Navigate
with
the
µ¶
keys to
Zone Types
and press
OK
.
2.
Scroll to the zone type to be modified and press
OK
.
3.
To change the input type of the selected zone, navigate to
Input Type
and press
OK
.
4. Use
the
µ¶
keys to select an input type that you want to enable/disable for the
selected zone type and press
OK
.
5.4 Setting up a keypad to use multiple languages
You can set several languages on the keypad.
1. Navigate
with
the
µ¶
keys to
This Keypad
and press
OK
.
2. Scroll
to
Text>Set Languages
and press
OK
.
3.
The current language is displayed as
Language 1
.
4. Scroll
to
Language 2
and press
OK
. If no language 2 is set, a blank line is displayed.
5. Use
the
µ¶
keys to select the second language and press
OK
.
6.
The keypad beeps once to accept the change and returns to
Set Languages
.
7. Press
NO
to cancel the change and return to
Set Languages
.
Summary of Contents for CS5500
Page 1: ...CS875 575 275 175 Alarm system CS5500 Programming Manual September 2003 ...
Page 83: ......
Page 84: ...1045335 ...
