background image

Exit and Entry Delay Times

5

Aborting Accidental Alarms

Your system can be set up with the opportunity to abort an 
accidental intrusion, Police or Auxiliary alarm. 

If the Dialer Abort feature is turned on, disarming the sys-
tem within a specified time period will silence the siren 
and prevent the alarm from being reported to the central 
monitoring station (thus aborting the alarm). See “Alarm 
Information” in Appendix A to determine if this feature is 
enabled for your system.

Fire alarms caused by smoke sensors, fire panic alarms, 
and heat sensors cannot be aborted. Disarming a fire alarm 
will silence the siren, but fire alarms are always reported. 
If an accidental fire alarm has sounded, follow the proce-
dures of your central monitoring station to prevent a false 
dispatch.

To cancel an alarm:

‰

Press 

1

 + Code.

Guidelines for Preventing Accidental 
Alarms

Following these guidelines will go a long way toward pre-
venting accidental alarms.

‰

Close doors and windows before you leave your 
house.

‰

When getting ready to leave the house, gather the 
things you want to take with you so you can exit 
immediately after arming the system.

‰

Always enter and exit within the programmed delay 
times.

‰

Make sure you leave through a door that has a delay 
time set for it. If you arm your system, then leave 
through a door without a delay time, an alarm will 
immediately sound.

‰

When you return, immediately disarm your system.

‰

Be aware of the devices in your security system and 
learn how each one operates. 

‰

Listen to system beeps. Take note of any touchpad 
messages or lights that indicate the current system sta-
tus.

‰

If you have pets, ask your installer if you need pet 
lenses in your motion detectors. Pets climb higher 
than you may guess, causing alarms when you are 
away.

‰

Check the location of your smoke detectors. Smoke 
detectors near bathrooms can be tripped by steam 
from a shower. Smoke detectors near the kitchen can 
be tripped by cooking smoke.

Refer to the User Sheet in Appendix A to determine what 
the specific settings are for your system.

Exit and Entry Delay Times

After arming your system, you need time to 
exit the building so you won’t set off an 
alarm. Likewise, upon returning to your home 
or business, you’ll need enough time to open 
the door and get to a touchpad to disarm the 
system.

‰

The Exit Delay is a period of time long enough to let 
you leave through a designated delay door after arm-
ing the system.

‰

The Entry Delay is a period of time long enough to let 
you unlock a designated delay door and get to a touch-
pad to disarm the system.

Exit Delay Example

You’re about to go on an errand. You are inside your house 
and have just armed the system to Level 3—AWAY. 

The interior sirens and touchpads sound three quick status 
beeps, telling you that the system accepted the command 
and has started the Exit Delay time. 

During the Exit Delay time, the system sounds one short 
beep every 4 seconds. The red ARMED indicator light on 
fixed display touchpads will flash. During the last seconds 
of the delay time, the beeps will accelerate to one per sec-
ond. Exit the premises immediately.

At the end of the Exit Delay, you’ll hear three more quick 
status beeps. These beeps indicate that the Exit Delay has 
ended. The ARMED indicator light on fixed display 
touchpads will stop flashing and remain on. Opening an 
armed door or window after the Exit Delay has expired 
will cause an alarm.

Entry Delay Example

You are returning to your house that is armed to Level 3—
AWAY. When you unlock and enter the designated delay 
door, the interior sirens and touchpads sound two short 
beeps every two seconds. The red ARMED indicator light 
on fixed display touchpads will flash. This tells you that 
the Entry Delay time has begun and reminds you to disarm 
the system to avoid setting off an alarm.

During the last 10 seconds of Entry Delay, you’ll hear two 
short beeps every second. 

B       E       E       P       S

A f t e r   a r m i n g ,  

y o u ' l l   h e a r  

3   q u i c k  

s t a t u s   b e e p s .

3   q u i c k   s t a t u s  

b e e p s   s o u n d  

b e f o r e   t h e   s y s t e m  

i s   a r m e d .

D u r i n g   t h e   E x i t   D e l a y ,  

y o u ' l l   h e a r   o n e   b e e p   e v e r y  

f o u r   s e c o n d s .    

L e a v e   t h e   p r e m i s e s   n o w .

B       E       E       P       S

U p o n   e n t e r i n g ,   d u r i n g   t h e  

E n t r y   D e l a y ,   y o u ' l l   h e a r   2   b e e p s  

e v e r y   2   s e c o n d s .

D i s a r m   t h e   s y s t e m   b e f o r e  

t h e   l a s t   o f   1 0   q u i c k   s t a t u s   b e e p s  

t o   a v o i d   a n   a c c i d e n t a l   a l a r m .

Summary of Contents for Concord express

































Reviews: