Keychain Touchpad Arming
4
Keychain Touchpad Arming
To disarm your system with a keychain touch-
pad, press the Unlock button.
Your installer can set up your keychain touch-
pad to arm the system in one of two ways:
1.
Press the Lock button to arm the system directly to
Level 3 with no Exit delay. Using this method, you
would not be able to arm to Level 2.
2.
Press the Lock button to increase the arming level
each time it is pressed (Level 1 to Level 2, or Level 2
to Level 3). The Exit delay time would be applied.
Quick Arm
Your system may be set up so that you’re able to arm the
system without using an access code.
To use Quick Arm:
Increase the arming level by simply pressing
2
or
3
at any touchpad.
Decreasing the arming level requires that the user enter a
code.
Quick Exit
Ìi
In UL Listed systems, this feature is disabled.
Your system may be set up so that when your system is
armed to Level 2—STAY, you’re able to press
D
on any
touchpad and simply walk out of the door without having
to disarm and rearm the system.
This is useful when your system is armed and you want to
quickly pop outside to pick up the newspaper without dis-
arming your system.
«ÀÌ>ÌÊt
If you step outside and are planning to come back in,
do not close the door behind you!
To use Quick Exit:
1.
When the system is armed to 2—STAY, press
D
at
any touchpad. You will begin to hear one beep every
five seconds. These beeps will continue throughout
the 2 minute Quick Exit interval.
Ìi
Opening the door without pressing
D
will cause the
entry delay to begin.
2.
Open the door and go outside. Leave the door open if
you are planning to come back in!
3.
Come back in within two minutes and close the door.
The system will rearm to 2—STAY.
Using the Chime Feature
Turning on the Chime feature is like having bells on every
protected door and window. When this feature is on, sirens
and speakers sound 2 beeps whenever anyone opens a pro-
tected door or window.
The Chime feature works only in Level 1—OFF.
To turn Chime on/off:
While in Level 1—OFF, from any touchpad, press
7
+
1
. While the Chime feature is on, touchpads
display, “CHIME IS ON” or “Chime.”
When the system is armed again, Chime becomes deacti-
vated.
Chime-On-Close
The Chime-On-Close feature works like the regular Chime
feature, but in addition to the double beeps heard upon
opening a protected door or window, the system sounds
one long beep when the door or window is closed again.
You can turn the Chime-On-Close feature on or off from
the programming menu. Refer to Appendix C, “Program-
ming Menus” for information on programming your sys-
tem.
Preventing Accidental Alarms
Your security system is engineered with advanced technol-
ogy that reduces the chance of an accidental alarm caused
by a technical problem. In wireless systems, this technol-
ogy prevents other devices, such as garage door openers,
ham radios, television remote controls, and cellular
phones, from interfering with your security system.
Most accidental alarms occur when leaving the house after
arming the system, or upon returning, before disarming the
system.
If, for example, you arm the system, then run upstairs for
something you forgot, the Exit Delay time may expire.
Once the Exit Delay expires, opening an armed door or
moving in front of a motion detector will cause an alarm.
T o u s e Q u i c k E x i t
I n L e v e l 2 H O M E , s i m p l y p r e s s
b e f o r e o p e n i n g t h e d o o r .
T h e d o o r m u s t b e c l o s e d a g a i n
w i t h i n 2 m i n u t e s t o a v o i d a l a r m .
C o n t a c t y o u r d e a l e r i f y o u ' d
l i k e t o u s e t h i s f e a t u r e .
D
D
Summary of Contents for Concord express
Page 32: ...Notes 28 Notes...
