MA-037 - CB Watch 3 Operating Manual
v7.0 - May 2020
Page 19 of 118
Also in this Operating Manual, we will often (as in the example above) mask part of the page
displayed with a blue screen in order to focus attention on the relevant part of the page.
When changing any setting in the HMI, please note that before the adjustment of a
parameter can take effect, it first needs to be validated and stored by pressing the "Set" or
“Change” button
in the corresponding sub-section.
Figure 16
–
Set button example
Note that,
while most changes will take place as soon as you press “Set”,
sometimes the
system will ask you to reboot after a big change, or will do it itself.
In particular, it is essential to reboot the system after any major change like:
•
Changing settings from spring to pump type
•
Changing the IEC 61850 configuration (it will reboot twice)
