
CHAPTER 3: INSTALLATION
ADD DEVICE TO SOFTWARE
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
3-51
3
3.
Click the
Quick Connect
button to open the window.
4.
Select the
Ethernet
interface and enter the IP address assigned to the C30, then click the
Connect
button. The
EnerVista UR Setup software creates a site named “Quick Connect” with a corresponding device also named “Quick
Connect” and displays them on the left side of the screen.
5.
Expand the sections to view data directly from the C30 device.
Each time that the EnerVista UR Setup software is initialized, click the
Quick Connect
button to establish direct
communications to the C30. This ensures that configuration of the EnerVista UR Setup software matches the C30 model
number.
When direct communications with the C30 via Ethernet is complete, make the following changes:
1.
From the Windows desktop, right-click the
My Network Places
icon and select
Properties
to open the network
connections window.
2.
Right-click the
Local Area Connection
icon and select the
Properties
item.
3.
Select the
Internet Protocol (TCP/IP)
item from the list provided and click the
Properties
button.
4.
Set the computer to “Obtain a relay address automatically” as shown.