
CHAPTER 3: INSTALLATION
ADD DEVICE TO SOFTWARE
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
3-47
3
If using a blue or grey Ethernet cable, skip the rest of the this section. If using an orange cross-over Ethernet cable, the
computer needs to be set up as follows.
1.
Use an orange Ethernet cross-over cable to connect the computer to the rear Ethernet port. In case you need it, the
following figure shows the pinout for an Ethernet cross-over cable.
Figure 3-54: Ethernet cross-over cable PIN layout
Next, assign the computer an IP address compatible with the relay’s IP address.
1.
From the Windows desktop, right-click the
My Network Places
icon and select
Properties
to open the network
connections window. Or in Windows 7, access the
Network and Sharing Center
in the Control Panel.