GE BiliSoft Service Manual Download Page 39

Page: 39 / 56

M1110150 006

Chapter 7: Accessories

Accessories

Stock Number

BiliSoft Fiberoptic Pad, Small

M1093118

BiliSoft Fiberoptic Pad, Large

M1093119

BiliSoft Pad Cover, Disposable, Small (Box of 50)

M1093120

BiliSoft Pad Cover, Disposable, Small (Box of 20)

M1097108

BiliSoft Pad Cover, Disposable, Large (Box of 50)

M1093121

BiliSoft Pad Cover, Disposable, Large (Box of 20)

M1097109

BiliSoft Nest, Disposable, Small (Box of 15)

M1093122

BiliSoft Nest, Disposable, Large (Box of 15)

M1093123

BiliSoft Carrying Case

M1110051

Ohmeda Mobile Stand (mounting brackets must be ordered separately)

6700-0025-800

Giraffe Spot PT Lite Roll Stand (mounting brackets must be ordered separately)

6600-0894-216

Bracket, Ohmeda Mobile Stand, female (for mounting to the Ohmeda mobile stand - order male

bracket separately)

6700-0014-800

Bracket, Dovetail Rail, female (for mounting to an Ohmeda dovetail rail or Giraffe Spot PT Lite roll

stand – order male bracket separately)

6600-0031-900

BiliSoft Mounting Bracket, male (mounts the BiliSoft to Ohmeda mobile stand, Giraffe Spot PT Lite

roll stand, or Ohmeda dovetail rail – order the appropriate female bracket separately)

M1097110

Ohmeda Medical BiliBlanket Meter II

6600-0198-900

Operation and Maintenance Manual, English 8.5x11 (USA)

M1110147

Operation and Maintenance Manual, English A4 (UK)

M1133866

Operation and Maintenance Manual, French

M1110476

Operation and Maintenance Manual, Spanish

M1110480

Operation and Maintenance Manual, Italian

M1110482

Operation and Maintenance Manual, Japanese

M1110484

Operation and Maintenance Manual, Dutch

M1110619

WARNING:

The use of accessories, replacement parts or power cords other than those specified by the

manufacturer may affect the performance of the unit and could result in damage to the unit or

unsafe operating conditions.

Summary of Contents for BiliSoft



















































Search results

Summary of Contents for BiliSoft

Reviews:

Related manuals for BiliSoft

Brands by name

Popular brands

GE BiliSoft, Service Manual

Search results

Summary of Contents for BiliSoft

Reviews:

Related manuals for BiliSoft

Brands by name

Popular brands