© 2007 by General Electric Company. All rights reserved.
M1110150 006
15
Chapter 5: Replacement/Checkout Procedures
Air Filter Cleaning/Replacement
Figure
Procedure
1.
The air filter can be vacuumed without removing it.
2.
To remove the air filter, use a Phillips screwdriver
to remove the four screws and lockwashers that
secure the rear access cover.
3. Use a Phillips screwdriver and adjustable
wrench or nut driver to remove the 4 screws,
lockwashers, and nuts retaining the air filter.
4.
Clean or replace the air filter as needed.
5.
Attach the air filter using the hardware removed
above in step 2.
6. Reinstall the rear access cover.
