in Window
to 39” Wide
1. Open window. Locate and mark
centerline of window. Mark two
lines 8“ to left and 8“ to right of
centerline.
2. Screw leveling bolt in correct
3/8” threaded hold of support
channel. Depth of window sill will
determine which 3/8” threaded
hole to use.
3. Place support channel over 8“
line of window sill with end against
window stool. Mark window sill
through Locating Hole A in
support channel.
4. Move support channel away
from window stool until Mounting
Hole B is over the mark on the
window sill. Secure the support
channel by driving a
B wood
screw into the window sill through
Mounting Hole
B.
5. Adjust leveling bolt so curved
top of support channel is 1/4”
below the top of the window stool.
This downward tilt toward the
outside prevents water from
entering the room.
Caution: Do not drill a hole in
the base pan. Unit is designed to
operate with approximatel
y
1/2”
of water in the base pan.
Repeat steps 3 through 6 for
second set of support channels.
7. Center the air conditioner in the
window opening with the bottom
bar sitting behind the window stool.
Do not cover side louvers.
A
Type B
Side Louvers
Sash Tracks
Lower
Filler P
Bottom
Type B
Mounting
Locating
Hole B
Hole A
.
318”
Threaded
Holes
\
Support
Bolt
Channel
OUTSIDE
“
4
”1
10
