background image

 

 Solver

PROBLEM

DOES 

AIR CONDITIONER

“DOES 

AS IT SHOULD”

SOUNDS

WATER 
OUTSIDE

WATER 

WATER IN BASE PAN

(ON OUTDOOR SIDE)

POSSIBLE CAUSE AND REMEDY

 in. Plug may have been bumped loose by vacuum cleaner or 

   fuse could have blown or circuit 

breaker may have 

● 

 

 or 

 

 front of air conditioner will restrict air 

● 

Thermostat Control may not be set high 

 Turn control to a higher number.

Highest setting should provide maximum cooling.

 Air 

 

 

 be 

 at 

 

   days. 

 instructions on page 

● 

 

 have 

 

 hot when 

 conditioner 

 

 

 on. 

 time for

it to cool down.

● 

Cold air maybe escaping through open furnace floor registers and cold air returns.

● 

Ventilation control maybe set at open position, allowing hot outside air to enter

 room.

● 

Cooling coils have iced up. To melt ice, set the fan at high speed and the Thermostat

Control to a lower number.

● 

 

 a 

 sound, 

   heard 

when 

compressor cycles 

on 

 off.

This is normal.

● 

Fan runs continuously when Selector Switch is in Cool or Fan position. This is normal.

● 

Excess water may overflow in extremely hot and humid weather. This is 

● 

Air conditioner must be 

 with the 

 tilt to the outside for proper water

● 

This is normal for a short period in areas with 

 normal for a longer

period in very humid areas. Moisture removed from indoor air drains to rear of cabinet
where it is picked up by a fan ring and thrown against the outdoor condenser 

If 

 need more help.. call, toll free:

GE 

 Center- ‘

consumer information service

6

Summary of Contents for AVS08













Reviews: