background image

Help us
help you...

Before using your air
conditioner, read this book
carefully.

It is intended to help you operate
and maintain your new air
conditioner properly.

Keep it handy for answers to your
questions.

If you don’t understand something
or need more help, write (include
your phone number):
Consumer Affairs
GE Appliances
Appliance Park
Louisville, KY 40225

Write down the model
and serial 

You’ll find them on a label behind
the air discharge louvers. They’ll

be easier to read if you shine a

flashlight on them or remove the
front grille. (See page 5.)

These numbers are also on the
Consumer Product Ownership
Registration Card that came with
your air conditioner. Before sending
in this card, please write these
numbers here:

Model Number

Serial Number

Use these numbers in any
correspondence or service calls
concerning your air conditioner.

If you received a damaged
air conditioner . . .

Immediately contact the dealer

(or builder) that sold you the air

conditioner.

Save time and money.
Before you request
service . . .

 Safety

Instructions

 M 

 before

 this 

When using this appliance, always
exercise basic safety precautions,
including the following:

● 

Use this appliance only for 

intended purpose as described in
this Use and Care Guide.

● 

This air conditioner must be

properly installed in accordance
with the Installation Instructions
before it is used. See 
grounding
instructions on page 9.

 

 

 air conditioner

by pulling on the power cord.
Always grip plug 

 and pull

straight out from the receptacle.

● 

Repair or replace immediately

all electric service cords that
have become frayed or otherwise
damaged. 
Do not use a cord that

shows cracks or abrasion damage
along its length or at either the

plug or connector end.

 

Check the Problem Solver on
page 6. It lists causes of minor
operating problems that you can
correct yourself.

2

Summary of Contents for AVS08













Reviews: