107
•
Appendix B - Profibus
Parameter
#
Range
Default
Thermistor Type
66
0 / 1 (0 - PTC, 1 - NTC)
0 (PTC)
Thermistor Trip
67
0..100 Tenth Kohm 0.1..10 K
0 (Off)
Undercurrent RST
68
10..120 (&121=OFF)
121 (Off)
Reserved 69..71
I/O Settings
Prog. Input #7
72
0..2(0=En.Save,1=S.Spd,2=Rst)
0 (Energy
Saver)
Prog. Input #8
73
0..2(0=D.Adj.,1=Rvrs,2=Rst)
0 (Dual Adjust)
Prog. Fault Relay
74
0..1 (0=Fault, 1=Fault-Fail Safe)
0 (Fault)
Relay ON Delay
75
0..3600
0 (Seconds)
Realy OFF Delay
76
0..3600
0 (Seconds)
Analog Output
77
0- Current, 0..200% of motor FLA
0 (Current)
Reserved 78
Communication Parameters
COMM. Protocol
80
0 – Modbus, 1-Profibus
1 - Profibus
Baud Rate
81
12..96 (*100)
96 (9600 bps)
Parity Check
82
0/1/2 (Even / Odd / No)
0 (Even)
Station Number
83
1..247 & (248= Off)
248 (Off)
1..126 & (127= Off) for Profibus
S. Link Par. Set
84
0 (Disable), 1 (Enable)
0 (Disable)
S. Link Control
85
0 (Disable), 1 (Enable)
0 (Disable)
Reserved 86..88
Modbus_#_Array
89..108 (# of parameter)
Defaults # are:
1 - Logic Status, 2 - I, 3 - V, 5 - Control In, 11 –
Thermistor Resistance, 37 - Thermal Capacity, 10 -
frequency, 4 - Phase Sequence, 6 - Dip Switch, 18
- Total Run Time, 19 - Total Starts, 20 - Last Start
Period, 21 - Last Start Peak I, 22 - time to start, 23
- Total Trips, 24 - last trip Number, 25 - Pre Trip I,
26 - Time to Reset U/C, 39 - Spare, 40 – Spare
