![background image](http://html1.mh-extra.com/html/ge/aquatrans-at868/aquatrans-at868_abridged-manual_4125785013.webp)
Installation
1-5
September 2004
LVD Compliance
For compliance with the European Union’s Low Voltage Directive
(73/23/EEC). the analyzer requires an external power disconnect
device such as a switch or circuit breaker. The disconnect device must
be marked as such, clearly visible, directly accessible, and located
within 1.8 m (6 ft) of the unit.
Note:
If the instructions in this section are followed, the unit will
comply with the Low Voltage Directive (73/23/EEC).
Figure 1-1: Properly Wired AT868
Summary of Contents for AquaTrans AT868
