Chapter 2: Installation
TruVision DVR 30 User Manual
7
Connecting devices to the unit
Use Figure 2 below as a visual guide to connect the various peripherals to the TVR 30.
Figure 2: Back panel connection diagram
2
3
1
4
5
13
12
6
7
8
9
10
Power
Link /Act
100
FD/Col
1
2
3
4
5
6
7
8
11
14
1.
Connect up to two CCTV monitors (main and spot)
and/or Y/C (S-video)
2.
Connect up to 16 cameras
3.
Connect to speakers for audio output
4.
Connect to audio input (available for each camera)
5.
Connect to a monitor that displays digital video
(HDMI)
6.
Connect to a PTZ control
7. Alarm
output
8.
Connect to alarm input cables
9.
Connect to a network attached storage (NAS) device
(This device is currently not supported)
10. Connect to USB devices
11. Connect to a network
12. Connect to a point-of-sale (POS) device
13. Connect to VGA monitor
14. Connect to the power cord
Note:
The TVR 30 only supports 800 x 600 resolution in VGA and HDMI. Adjust your
monitor accordingly to this resolution. If looping video, ensure that the Termination
option (Cameras > Adjust Video) is disabled.
Connecting required devices
Before powering up the unit, cameras and a main monitor should be connected to
the unit for basic operation. If needed, connect a spot monitor for displaying full
screen video of all installed cameras in sequence.
Summary of Contents for Appliances 30
Page 1: ...GE Security P N 1068702 REV A ISS 10NOV09 TruVision DVR 30 User Manual...
Page 26: ...Chapter 3 Operating instructions 22 TruVision DVR 30 User Manual...
Page 70: ...Chapter 6 Advanced setup 66 TruVision DVR 30 User Manual...
Page 82: ...Appendix A Specifications 78 TruVision DVR 30 User Manual...
