GE ApexPro TT, Technical Manual

Page: 171 / 192

Technical specifications
2001989-351A ApexPro™ A-9
Nonin Xpod oximeter
Performance specifications
The Nonin Xpod oximeter is manufactured for GE by Nonin Medical, Inc. It is
recommended for use with Nonin sensors only.
Physical specifications
Certification
UL 60601-1 CE marking for the 93/42/EEC Medical Device Directive.
Accutracker DX noninvasive blood pressure monitor
Performance specifications
Water resistant with sensor
in place: IEC 60529 IPX2 rating (spray and wipe only)
Controls and Indicators
SpO2 sensors: Refer to ApexPro CH Telemetry System Additional Product
Information addendum for a list of approved sensors and
specifications.
CIC Pro center
Messages: Refer to the ApexPro Telemetry System Operator’s Manual
for a list of messages.
Numerical display: SpO2 (% value), HR (bpm)
Alarms: SpO2 high/low, HR high/low
Height: 5.3 cm (2.1 in)
Depth: 2.0 cm (0.8 in)
Width: 1.5 cm (0.6 in)
Weight: 75.0 g (2.7 oz) including 1.8 m (6.0 ft) of cable and
connector
Technique: Ausculatory. Diastolic pressure is determined from Phase 5
Korotkoff sounds.
Accuracy: Blood pressure measurements determined with this device
are equivalent to those obtained by a trained observer using
the cuff/stethoscope auscultation method, within the limits
prescribed by the American National Standard, Electronic or
automated sphygmomanometers.