GE ApexPro TT Technical Manual Download Page 161

Page: 161 / 192

Checkout

2001989-351A

ApexPro™

7-23

Communication test

This procedure verifies that the telemetry system transmits and receives the data
correctly from the Accutracker.

Attach the Accutracker to the ApexPro Telemetry system.

NOTE

You must have ECG leads with a shorting cable or simulator attached to the
ApexPro Telemetry system for this test to work.

CAUTION

Refer to the ApexPro operator’s manual for proper operation
guidelines and cuff/microphone placement.

Place blood pressure cuff on the arm.

Turn the Accutracker on and press the

button.

When the display appears on the system screen, verify that the Accutracker
display numbers match the display numbers.

Turn Accutracker off.

Repair log

Unit Serial Number:

Institution Name:

Date

Maintenance/Repair

Technician

Summary of Contents for ApexPro TT

































































































































































































Search results

Summary of Contents for ApexPro TT

Reviews:

Related manuals for ApexPro TT

Brands by name

Popular brands

GE ApexPro TT, Technical Manual

Search results

Summary of Contents for ApexPro TT

Reviews:

Related manuals for ApexPro TT

Brands by name

Popular brands