4.3.3
Connect compressed air supply
Introduction
This section describes how to connect the compressed air supply.
For requirements on air supply, refer to
Section 4.1 Site requirements, on page 77
Section 9.1 Specifications, on page 150
.
Connect compressed air supply
Step
Action
1
Connect compressed air to the air supply connection on the electrical cabi-
net.
2
Make sure that the air supply pressure is between 6.5 to 10 bar g. The regu-
lator is set to 6.5 bar g at the factory and shall not be changed.
4 Installation
4.3 Setup
4.3.3 Connect compressed air supply
ÄKTA ready XL Operating Instructions 29281616 AE
91
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
