Part
Component
ID tag
Function
5
Installation
switch
-
The switch is used for releasing and engag-
ing valves during flow kit and column instal-
lation. The switch has three different posi-
tions:
Flow kit install: : This mode opens all
valves. The user can then manually open/
close valve locks.
Run: : This mode engages all valves. The
user cannot open the safety valve locks —
the valves are controlled by the system.
Drain: This mode opens and closes valves
in a specific order to allow for removal of
liquid from tubing and pumps via the col-
umn bottom connection.
6
Cable for
connection
to air sensor
AE-151
A cable for air sensor AE-151 communica-
tion cord.
7
Inlet valves
XV-011
to
XV-014
Four inlet valves, located on the inlet side
(left side) of the system for pump B.
8
Inlet valves
XV-001
to
XV-006
Six inlet valves, located on the inlet side
(left side) of the system for pump A.
9
Caster wheel
(4 pcs)
-
Four caster wheels with wheel brakes.
10
Cable for
connection
to conductiv-
ity and tem-
perature sen-
sor
CE-101/
TE-101
A cable for communication to conductivity
and temperature sensor CE-101/TE-101
fitted on the flow kit.
11
Operator
console
-
The system is equipped with a monitor
screen and keyboard for convenient user
access (only applicable to system with
UNICORN control software).
3 System description
3.2 Illustrations
ÄKTA ready XL Operating Instructions 29281616 AE
35
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
