![background image](http://html.mh-extra.com/html/ge/aep23/aep23_use-and-care-and-installation-manual_122182010.webp)
3.
WINDOWFILLER
cabinet on floor, bench or table.
Plastic
r
Frame
2. Slide the ‘I” section of the window filler panel
into the panel retainer on the side of the
cabinet as shown above. Do both sides.
3. Insert top and bottom legs of the window filler
panel frame into the channel in the top support
angle and bottom rail. Do both sides.
Plastic
Air Condition
Frame
Locking
“I” Section
Filler
4.
2 Type A screws into holes in the top
leg of the filler panel frame. Do not
should slide easily.
4.
Open window and mark center of window stool.
2. Place cabinet in window with bottom stool
angle firmly seated over window stool as
shown. Bring window down temporarily
behind top rail to hold cabinet in place.
10
3.
Shift cabinet left or right as needed to line up
center of cabinet on center line marked on stool.
Fasten cabinet to window stool with 2 Type B
screws. (You may want to drill pilot holes.)
5.
Hold each support
bracket flush
against outside of
sill and tight to
bottom of cabinet
as shown. Mark
brackets at top
level of sill and remove them,
2. Assemble sill angle brackets to support
brackets at positions previously marked, as
shown. Hand tighten only—some adjustment
may be required later.
3. Install support brackets, with sill angle
brackets attached, to cabinet as shown.
4. Tighten all 6 bolts and screws securely.
Type C
and
(2 required for each
bracket)
RIGHT
D
.
LEFT
0
●
(1 required for each
bracket)