background image

YOUR GE ROOM AIR 

Staple sales slip or 

 check

here. Proof of original 

 date

is needed to 

 n 

under 

WHAT IS COVERED

FULL ONE-YEAR 

This warranty is extended to

For one year from date of original

the original purchaser and any

purchase, we will provide, free of

succeeding owner for products

charge, parts and service labor in

purchased for use in the 48

your home to repair or replace

mainland states, Hawaii and

any part of the room air

Washington, 

 In Alaska the

 that fails because

warranty  is the same except that it

of a manufacturing defect.

is LIMITED because you must pay

FULL FIVE-YEAR WARRANTY

to ship the product to the 
shop or for the service technician’s

For five years from the date of

travel costs to your home.

original purchase, we will provide,
free of charge, parts and service

All warranty service will be

labor in your home to repair or

provided by our Factory 
Centers or by our authorized

replace any 

 of 

 

Customer 

 servicers during

 system (the

normal working hours.

compressor, 
evaporator and all connecting

Should your appliance need

tubing) that fails because of a

 during warranty period

manufacturing defect.

or beyond, call 1-800-GE-CARES

For each of the 

 warranties:

(1-800-432-2737).

Transportation expense to and
from a service shop and shop
service labor if required will be free
of charge.

WHAT IS NOT COVERED

Improper installation.

. Failure of the 

 resulting

● 

Service 

trips to teach you how to

If you have 

an 

installation

from modifications to the product or

use the product.

problem, or 

if the air conditioner is

due to unreasonable use including

Read your Use and 

Care 

of improper cooling capacity for the

failure to provide reasonable and

If you then have any questions

intended use, contact your dealer

 maintenance.

about operating the product,

or installer. You are responsible for

. Failure due to corrosion on

please contact your dealer or our

providing adequate electrical

models not corrosion-protected.

Consumer Affairs office at the

connecting facilities.

. Damage to product caused

address below, or call, toll free:

. Replacement of fuses or resetting

by improper power supply voltage,

GE Answer 

of circuit breakers.

accident, fire, floods or acts of God.

800.626.2000

● 

In commercial locations labor

WARRANTOR IS  NOT

consumer information service

 to move the unit to a

RESPONSIBLE FOR

location where it is accessible for

CONSEQUENTIAL DAMAGES.

service by an individual technician.

Some 

states 

do not allow the exclusion or limitation of incidental or consequential damages, so the 

 limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and 

 may also have other rights which vary from state to state.

To know what your legal rights are in your state, consult your local or state 

 affairs office or your state’s Attorney General.

Warrantor: General Electric Company

If further help is needed concerning this warranty, write:

 Affairs, GE Appliances, Louisville, KY 40225

 No. 

Pub 

 49-7289

Printed in the United States

 

Summary of Contents for AEP23

















Reviews: