– 66 –
Microwave
Speedcook*
Convection
Broil**
Toast**
Warm
Proof
Upper
Heater
Halogen
Not Available Cycles by PL
(See PL Chart)
Not Available On
On
Not
Available
Not
Available
Upper
Heater
Ceramic
Not Available Cycles by PL
(See PL Chart)
Not Available On
On
Not
Available
Not
Available
Lower
Heater
Not Available Cycles by PL
(See PL Chart)
Not Available On
On
Not
Available
Not
Available
High Voltage
Cycles by PL
(See PL Chart)
Cycles by PL
(See PL Chart)
Not
Available
Not
Available
Not
Available
Not
Available
Not
Available
Convection
Heater
Not Available Not Available Preheats to
and cycles
around users
set point.
Not
Available
Not
Available
Cycles
from
169°F to
195°F.
Cycles at
95°F.
Convection
Fan
Off
Not Available On
Not
Available
Not
Available
On
On
Damper
Open
Closed
Closed
Closed
Closed
Closed
(Moist)
Open
(Crispy)
Closed
TT Motor
On
On
On
On
On
On
On
Oven Lamp
(Cavity)
On
On
On
On
Off
On
On
Ventilation
Motor
Off
Low
Low
Low
Low
Off
Off
Magnetron
Fan
On
On
On
On
On
On
On
Load Algorithm Chart
* In Speedcook when the Upper Heaters or Lower Heater set above power level six, the heaters will cycle at the power
level for which they are set for the
fi
rst 25 minutes. After 25 minutes both heaters change to power level 8, after 50
minutes, both heaters switch to power level 6.
The upper and lower heaters load share with the microwave section. This means the microwave power level and the
upper or lower heaters power level (which ever is highest), when added together can not be greater than power level 10.
Ex. Upper Heater - 8, Lower Heater 7, maximum setting for Microwave is 2.
** In broil and toast, power levels cut back the same as Speedcook.
(
Continued Next Page
)
Operating Charts
