Getting started
2
CAUTION:
1. Use only the power adaptor that came with this unit.
Using other power adaptors may damage the unit.
2. To prevent fire or electrical shock hazard, do not
expose this product to rain or moisture.
Telephone base installation
1. Plug the smaller end of the power adapter into the power jack at the bottom of the
telephone base, route the cord through the tabbed slot on the left.
2. Plug one end of the telephone line into the jack at the bottom of the telephone
base, route the cord through the tabbed slot on the right.
3. Plug the other end of the telephone line into a telephone wall jack.
4. Plug the larger end of the power adapter into an electrical outlet not controlled by
a wall switch.
If you have DSL high speed Internet service, a DSL filter is required (not included).
Contact your DSL service provider for more information about DSL filter.
DSL filter (not included)
is required if you
have DSL high speed
Internet service.
Telephone jack requirements
To use this phone, you need a RJ11C type modular telephone jack,
which might look like the one pictured here, installed in your home.
If you do not have a modular jack, call your telephone service
provider to find out how to have one installed.
Wall plate
Modular
telephone
line jack
