GE 30544 Page 12 Manual Download

Page: 12 / 58

Overview

Battery charging

The following table summarizes the battery charge indicators and what actions need

to be taken.

Battery indicators

Battery status

Action

Battery icon is scrolling. Battery is charging.

Keep the handset in the or charger

when not in use.

Battery icon is on

steadily.

Battery is completely

charged.

The handset is ready for use.

It will take approximately 2 hours

for the battery icon to indicate a full

charge even if the handset is only

removed from the charger for a short

time and replaced. This is a normal

operation and does not indicate a

battery issue.

Battery icon is empty

and the screen shows

LOW BATTERY

CHARGE HANDSET

Battery is low.

Place the handset in the charger to

charge without interruption (at least

30 minutes) before use.

The screen is blank.

Battery has no power while

the handset is out of the

charger.

Place the handset in the charger for

at least 16 hours without interruption.

See troubleshooting on page 40

for

help if the screen remains blank after

charging.

Summary of Contents for 30544



























































Search results

Summary of Contents for 30544

Reviews:

Related manuals for 30544

Brands by name

Popular brands

GE 30544, Manual

Search results

Summary of Contents for 30544

Reviews:

Related manuals for 30544

Brands by name

Popular brands