21
D
IALING
B
ACK
When reviewing Caller ID records, you can dial back the numbers showing on the display by pressing the DIAL
button.
I
F
Y
OU
P
ROGRAMMED
Y
OUR
L
OCAL
A
REA
C
ODE
1. Use the REVIEW up and down arrow button to display the number you want to dial.
2. Press the DIAL button. If you see a number with 7 digits (i.e.555-1234), then the call was received from within your
area code. However, this does not guarantee the call is a local call. If you see a number with 11 digits (i.e.1-234-
555-1234), then the call received was not from your area code. The unit displays “
Press
to adjust
.”
3. To adjust the phone number format, use the REVIEW up and down arrow buttons. For instance, a 7-digit local
number sometimes cannot be dialed because it requires a 10-digit or 11-digit format. Use the REVIEW up and
down buttons to scroll through 7, 10 and 11-digit numbers.
7-digits:
7-digit telephone number (i.e.555-5555)
10-digits:
3-digit area code +7-digit telephone number (i.e.425-555-5555)
11-digits:
long distance code 1 +3-digit area code +7-digit telephone number (i.e. 1-425-555-5555)
4. To dial the displayed number, pick up the handset or press DIAL again.
I
F
Y
OU
D
ID
N
OT
P
ROGRAM
Y
OUR
L
OCAL
A
REA
C
ODE
1. Use the REVIEW up and down arrow button to display the number you want to dial. You will only see 10-digit
numbers (i.e.234-555-1234).
2. Press DIAL to dial back. You may adjust the number format if “
Press
to adjust
” shows in the display.
C
ALL
W
AITING
C
ALLER
ID
This feature allows you to see who is calling when you hear the call waiting beep. The caller identification
information appears in the display after you hear the tone.
• Press the FLASH button to put the person to whom you’re talking on hold and answer the incoming call.
IMPORTANT:
In order to use this unit, you must subscribe to either the standard Name/Number Caller ID Service or
Caller ID with Call Waiting Service. To know who is calling while you are on the phone, you must subscribe to Caller ID with
Call Waiting Service.
C
ALLER
ID D
ISPLAY
M
ESSAGES
The following special messages indicate the status of a message or the unit:
00 TOTAL CALLS
The Caller ID memory log is empty.
UNKNOWN CALLER
The incoming call does not have Caller ID service or their service area is not linked to
yours. If
UNKNOWN CALLER
appears along with a calling number, the name information
for that number was not available.
BLOCKED CALL
The caller is registered as “Private Number ”and their Caller ID information is withheld.
INCOMPLETE DATA
Caller information has been interrupted or corrupted during transmission.
NO DATA
No Caller ID signal has been detected, or Caller ID service has not been activated.
START/END
You are at the beginning or the end of the Caller ID memory log.
Battery power level is low
