manualshive.com logo in svg

GE 28821 Series, User Manual, Page: 87 / 99

Share
Download
GE 28821 Series User Manual Download Page 87

below to return to the factory default settings. 

From the Handset Setup Menu:

 

1. Press the caller ID-volume (

6 

or 

5

) button to scroll to the 

DEFAULT SETTING 

sub-menu.   

2. Press the 

mute/menu OK 

button to enter the menu. 

DEFAULT SETTING 1YES 2NO 

shows in the display. The 

default setting is 

2NO

. 

3. Use the touch-tone pad to select 

1YES 

or 

2NO

, or use the caller ID-volume (

6 

or 

5

) button to move the 

cursor to 

1YES 

or 

2NO

.   

NOTE: If you choose 

YES 

all the settings in the programmable menu are returned to factory default 

setting.

 

4. Press the 

mute/menu OK 

button to save your selection. You will hear a confirmation tone. 

 

Telephone Operation

 

Visual Indicators

 

Base

 

The 

charge/in use voicemail 

indicator on the base will flash to alert you to an incoming call, during paging, or if 

you have a message waiting from your service provider. The indicator will remain lit when a handset is in the base 
charging or when the line is in use. 

Handset

 

The 

TALK 

and SPEAKER indicator buttons flash when you receive a call and remain lit during a call. 

The keypad and CID will also light when a call is received. 

VMWI / Visual Ringer Indicator on Handset

 

IMPORTANT: In order to use this unit’s Voice Mail Waiting Indicator (VMWI) feature, you must 
subscribe to this service from your phone company. 

 

The VMWI indicator on the top of the handset flashes when you receive a new message from your service 
provider. Also, it serves as a Visual Ringer function. It will flash when there is an incoming call. 

Speakerphone Operation

 

NOTE: If you are using the speakerphone, remain close to handset so the party you are speaking to 
can hear you. 

 

If you are using the handset and want to switch to the speakerphone, press the SPEAKER button, press 

END/cancel 

to end conversation.   

If you are using the speakerphone and want to switch to the handset, press the 

TALK 

button, press 

END/cancel 

again to end conversation.   

Making a Call

 

1. Press the 

TALK 

or SPEAKER button. Dial the desired number.   

- OR -   

Dial the number first, then press the 

TALK 

or SPEAKER button.   

- OR -   
Press the caller ID-volume (

6 

or 

5

) button to select the desired record, then press the 

TALK 

or SPEAKER 

button. 

2. When finished, press the 

END/cancel 

button to hang up. 

NOTE: You may enter up to 32 pre -dial digits.

 

NOTE: If you want to delete the pre-dial number you entered, press the 

delete/intercom/conf 

button 

until all of the digits are erased. 

 

Answering Calls

 

1. When the phone rings, press the SPEAKER button on the handset.   

Summary of Contents for 28821 Series




































































































Reviews:

No comments