manualshive.com logo in svg

GE 28821 Series, User Manual, Page: 28 / 99

Share
Download
GE 28821 Series User Manual Download Page 28

8

Reviewing And Deleting Stored VIP Melody Record

From the Handset Setup Menu: 

1.   Press the 

mute/menu OK

 button to enter to 

VIP MELODY

 menu.

.  Use the caller ID-volume ( 

6

 or 

5

) button to scroll to the desired 

VIP 

Melody Record

.

.   If you want to delete the information, press the 

delete/intercom/conf

 button on 

the handset while the entry displays. The display show 

DELETE VIP# ?

.

.   Press 

delete/intercom/conf

 again to confirm. You will hear a confirmation tone 

and 

VIP# DELETED

 shows in the display.

Key Tone

From the Handset Setup Menu: 

1.  Press the caller ID-volume ( 

6

 or 

5

) button to scroll to the 

KEY TONE

 sub-menu.

.  Press 

mute/menu OK

 button to enter the menu. 

SET KEY TONE 1ON 2 OFF

 shows 

in the display.

.  Use the touch tone pad on the handset to select 1 or , or use the caller ID-

volume ( 

6

 or 

5

) button to scroll to your selection. 

1ON

 is the default setting.

.  Press the 

mute/menu OK

 button to confirm and the key tone setting shows in 

the display.

Summary of Contents for 28821 Series




































































































Reviews:

No comments