manualshive.com logo in svg

GE 28821 Series, User Manual, Page: 40 / 99

Share
Download
GE 28821 Series User Manual Download Page 40

0

Intercom Operation  

(applicable only with additional handsets)

The intercom feature allows you to have a conversation with another registered 
handset without tying up the telephone line, allowing you to still receive incoming 
calls.

Making an Intercom Call

1.  Make sure the handset is 

OFF 

(not in TALK mode).

.   Press the 

delete/intercom/conf

 button on the handset.

.   Use the touch-tone pad to select the handset you want to page.

NOTE: To cancel page, press the

 delete/intercom/conf

 button again 

or the 

END/cancel

 button on the sending handset.

.  Wait for the person at the receiving handset to press the 

delete/intercom/conf

 

button.

NOTE: If the receiving handset does not answer within two minutes, 

the intercom call is automatically canceled. The originating 

handset displays 

NO ANSWER

.

5.   When finished, press the 

END/cancel

 button or 

delete/intercom/conf

 button on 

either handset to deactivate the intercom.

NOTE: The system is expandable up to 

6

 handsets (by purchase 

of optional Model 

TBD

 handset with recharge cradle). When 

4 handsets are registered, the system can handle 2 separate 

intercom operations at once, for example, 1st handset intercoms 

with 2nd handset while 3rd handset intercoms with 4th handset.

Receiving an Intercom Call

When you receive an intercom call, your handset beeps. To answer the call press the 

delete/intercom/conf

 button or 

TALK

 button.

Summary of Contents for 28821 Series




































































































Reviews:

No comments