manualshive.com logo in svg

GE 28821 Series, User Manual, Page: 31 / 99

Share
Download
GE 28821 Series User Manual Download Page 31

1

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not recommended 
that a handset be registered again unless absolutely necessary.

From the Handset Setup Menu:

1.  Press the caller ID-volume ( 

6

 or 

5

) button to scroll to the 

REGISTRATION

  

sub-menu.

.   Press the 

mute/menu OK

 button to enter the menu. 

REGISTRATION 1YES

4

2NO

 

- - -

 shows in the display The default setting is 

2NO

.

.   Use the touch-tone pad to select 1 for YES or  for NO. Or use the caller ID-volume 

( 

6

 or 

5

) button to scroll to 

1YES

 

or 

2NO

.

.  If you select 

1YES

, press the 

mute/menu OK

 button. 

HOLD BASE PAGE FOR 5 

SECONDS, THEN PRESS HANDSET PROGRAM

 shows in the display. (Your handset 

should be held near the base during registration process.)

5.  Press and hold the page button on the base unit, the 

charge/in use voicemail

 

indicator flashes. Press the handset 

mute/menu OK

 button. 

REGISTERING

 shows 

in the display. 

HANDSET X REGISTERED

 shows in the handset display, where X is 

the handset number. You may now rename your handset. (Refer to Step  &  of 
Handset Name Section)

NOTE: IF you are re-registering the handset through the handset 

menu; to rename your handset you must go to the Handset Name 

Section and start from the beginning step.

Summary of Contents for 28821 Series




































































































Reviews:

No comments