manualshive.com logo in svg

GE 28821 Series, User Manual, Page: 5 / 99

Share
Download
GE 28821 Series User Manual Download Page 5

5

Hearing Aid Compatibility (HAC)

This telephone system meets FCC standards for Hearing Aid Compatibility.

Licensing

Licensed under US Patent 6,7,009.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated with 
a minimum distance of 0 centimeters between the radiator and your body. This 
transmitter must not be co-located or operated in conjunction with any other 
antenna or transmitter.”
For body worn operation, this phone has been tested and meets the FCC RF exposure 
guidelines when used with the belt clip supplied with this product. Use of other 
accessories may not ensure compliance with FCC RF exposure guidelines.

Information for DECT Product

Thi

s t

elephone is compliant with the DECT 6.0 standard which 

operates in the 1.9GHz to 1.9GHz frequency range.

Summary of Contents for 28821 Series




































































































Reviews:

No comments