0
Tone/Pulse Dialing
NOTE: This setting may be made only with the base.
1. Press the
menu/flash
button until
4
1TONE 2PULSE
shows in the display.
1TONE
is
the default.
. Press the
caller id
(
9
or
:
) button or the touch-tone pad to scroll to
1TONE
or
2PULSE
.
. Press
mute/menu
to save. You will hear a confirmation tone.
Transfer ON/OFF
NOTE: This setting may only be made with the handset.
In order to use the call Transfer feature (applicable ONLY with additional handsets),
you must have the Transfer ON/OFF set to ON through the menu of each handset.
1. Press the
mute/menu
button until
TRANSFER
4
1OFF
shows in the display.
. Use the
CALLER ID-VOLUME
(
6
or
5
) button or the touch-tone pad on the
handset to scroll to
2ON
.
. Press
mute/menu
again to save. You will hear a confirmation tone.
Registration (Link Cordless Handset)
NOTE: If a handset become de-registered or inoperative, it may be
necessary to register the cordless handset(s) again.
Registration links the base to a cordless handset. Once a handset is registered it
can use the base’s phone connection. A cordless handset will not operate until it is
registered to the base. During the registration process, keep the handset near the base.
1. Press the
menu/flash
button on the base until
LINK HANDSET ?
shows in the
display.
2 NO
is the default setting.
. Press the
1
number key or press the
caller id
(
9
or
:
) button on the base to scroll
to
1YES
.
. Press
menu/flash
on the base to confirm handset is linked to the base.
WAITING
HANDSET REGISTRATION
shows in the display.
4. Press the
mute/menu
button on the handset until
LINK BASE?
shows in the display.
NO
is the default setting.
5. Press
CALLER ID-VOLUME
(
6
or
5
) button on the handset to scroll to
YES
.
6. Press
mute/menu
on the handset again to confirm. You will hear a long
confirmation tone when the handset is successfully linked to the base.