manualshive.com logo in svg

GE 15LSWGR901, Operation & Maintenance Manual, Page: 71 / 188

Share
Download
GE 15LSWGR901 Operation & Maintenance Manual Download Page 71

5

At the heart of every POWER/VAC switchgear is the vacuum interrupter,
which delivers fast, quiet power switching and precise arc extinction. Oil
gas or high pressure air is not needed to aid interruption, resulting in a 
simpler, more reliable breaker.

POWER/VAC breakers feature easy-to-read controls and indicators, an
easily inspected primary disconnect, contact erosion indicator and 
precisely tooled breaker mechanisms. A lower compartment roll-in breaker
is available for indoor or walk-in outdoor switchgear.

Standardization and interchangeability of POWER/VAC breakers greatly
simplify maintenance and training. For example, all breakers are the same
size, and most frame parts, primary conductors, disconnects and mecha-
nisms are interchangeable.

The main bus 
compartment is
completely isolated
by 11 gauge metal
barriers. Bus bars
insulated with high
dielectric epoxy
pass through track-
resistant polyester
glass barriers
between cubicles. 

The secondary dis-
connect combines
the contact reliability
of a plug with the
self-aligning con-
venience of sliding
contacts.

Current transformers
are located behind
mechanically actu-
ated safety shutters
and a barrier that
isolates the primary
disconnect as the
breaker is moved
into the disconnect
position.

Voltage transformer
trays are automati-
cally grounded on
withdrawal, which
provides isolation
from primary 
connections.

Dry type control
power transformers
are insulated with
molded resin epoxy
and mounted in a
drawout tray for
easy access.

Even two-breaker
vertical sections
offer ample space
for terminating up
to two 750 MCM
cables per phase. 

Summary of Contents for 15LSWGR901





























































































































































































Reviews:

No comments