63
To use a multicast address other than the default, uncheck
Use default Multicast Address
on both web pages,
click the
Advanced
command in the mode drop-down menu and enter the same multicast address in the
Streaming Address
field.
Figure 70. The advanced mode screen
The advanced mode screen has settings for:
•
The Streaming Port
•
Streaming Address
•
Sender Control Enable
•
Sender Control Port
•
Receiver Control Enable
•
Receiver Control Port
These settings must match exactly between the multicast device and any device which wants the stream.
Note:
Configured incorrectly IP multicast can become a serious drain on your networks resources! If you are at all uncertain
on how to setup IP multicast, please contact your network administrator or IS professional.
Summary of Contents for VSR-300
Page 1: ...GE Security VSR User Manual ...
Page 17: ...13 Figure 6 Typical network setup ...
Page 78: ...VSR User Manual 74 ...
