GE Security VSR-300 User Manual Download | Manualshive

Page: 52 / 78

background image

VSR

User Manual

48

Dynamic DNS and GnuDIP

In order to use Dynamic DNS with GnuDIP, the user has to configure following in the menus:

•

Name Service

must be set to GnuDIP (Ethernet Setting Menu).

•

Primary Name Server

must be set to the IP address of the GnuDIP server (Ethernet Setting Menu).

•

Hostname

must be set to the required hostname format e.g.

ge04.companyname.net

. For registration

purposes, the string until the first dot is used as hostname (here: ge04), the remainder is used as domain
(here: companyname.net). The hostname is set via the Ethernet Setting menu and is case sensitive.

•

DDNS update time

must be set to a reasonable value (e.g. 2 minutes).

•

The password for the DDNS server has to be set in the

Passwords->DDNS password menu

. The

password is 4 digits long (The Enter button can be used for the number 0).

When everything is configured correctly, the VSR will send periodically a Dynamic DNS update message over
TCP port 3495 to the Dynamic DNS server telling the server its hostname. The VSR does not include its IP
address in the message. Instead the Dynamic DNS server extracts the IP address of the VSR via the Ethernet
source IP address. This guarantees that the correct IP address is used even when the VSR is behind a NAT
router.

Advanced Menu

/

Communications

/

Ethernet Advanced

Use this menu to configure the Ethernet Advanced communications settings. Select from the
following:

•

Bandwidth:

Local bandwidth control, set from 5Kb per second through 250Kb and Unlimited. The

minimum of this setting and the setting requested by Video Navigator will be used.

•

TCP MTU Size:

Select from 1514, 1400, and 1200. The MTU describes the maximum possible TCP

packet size. 1514 is optimal for most Ethernet network environments.

•

Listen Port:

The port that the VSR uses to listen to Streaming commands.

Figure 53. The ethernet advanced menu

Advanced Menu

/

Communications

/

Streaming

Use this menu to configure the streaming settings. Video streaming is the process that the VSR family of
products including the IP CODEC and IP Camera use to listen on a specific UDP/TCP port for control

«
...
50
51
52
53
54
...
»

Summary of Contents for VSR-300















































































Reviews:

No comments

Related manuals for VSR-300

Brand: W Box Technologies Pages: 4

Brand: Logik Pages: 32

Brand: CCTV Imports Pages: 74

Brand: Gyyr Pages: 24

Brand: Ganz Pages: 18

Brand: Advantech Pages: 66

NViS 5604-SERIES

Brand: Nexcom Pages: 73

Brand: HIKVISION Pages: 7

DS-7204HVI-M Series

Brand: HIKVISION Pages: 9

Brand: HIKVISION Pages: 79

Brand: HIKVISION Pages: 80

Brand: Chipatronic Pages: 7

Brand: HIKVISION Pages: 121

Brand: Abus Pages: 58

Brand: Delton Pages: 26

Brand: USAVision Pages: 23

Brand: Vivotek Pages: 198

Brand: Q-See Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands