VSR
User Manual
62
Figure 68. VSR setup as receiver and SymNet setup as sender
Streaming Settings for UDP multicast
Figure 14
illustrates streaming settings for a UDP multicast from the SymNet to the default multicast address.
The default multicast address is 230 for the first field and the balance being the unit’s current IP address.
The VSR-4 is setup as a receiver in
Normal
mode with the
Receiver Cam Map IP
address set at 192.168.10.20
(The IP address of the sender) and
Use default Multicast Address
checked. The SymNet is setup as a sender
with the mulitcast address set at 230.168.10.20. Once these settings are saved on their respective web pages the
SymNet will begin sending multicasting video (once requested) and the VSR-4 will begin receiving streaming
video.
Figure 69. Sample UDP multicast settings
Summary of Contents for VSR-300
Page 1: ...GE Security VSR User Manual ...
Page 17: ...13 Figure 6 Typical network setup ...
Page 78: ...VSR User Manual 74 ...
