PROGRAMMING
USING THE LED KEYPAD
Only NX-13xx keypad series allow to program user cards.
ACTION
RESULT
Entering the Program Mode
&
Á
_
x
x
x
x
x
x
x
x
Enters the Program Mode.
Stay
,
Chime
,
Exit
,
Bypass
&
Cancel
LEDS will flash.
&
[
Go To Program Code
]
Factory Default is
`^XZ
x
x
x
x
x
x
x
x
If the "Go To Program Code" is valid, the "Service"
LED will flash and the 5 function LEDs will illuminate
steady. You are now in the Program Mode and
ready to select the module address.
Entering the Module Address
&
XYW
#
(example only)
x
x
x
x
x
x
x
x
Enters the module address. Refer to the table on
page 6 for the assigned address.
The Armed LED will illuminate while it is waiting for a
programming location to be entered.
Programming a Location
If an attempt is made to program an invalid entry for a particular segment, the keypad
sounder will emit a triple error beep (beep, beep, beep), and remain in that segment
awaiting a valid entry.
NX-1750 Installation manual
Page 8
18/02/05
