23
Installer Programmable Lighting
If you would like specific lights to turn on during
Entry and Exit Delay times, or if you would like a
light to flash to indicate successful arming and dis-
arming, contact your installer.
S
ECTION
13:
O
PENING
AND
C
LOSING
R
EPORTS
The Opening and Closing Reports feature allows
pagerholders and/or the central station to be noti-
fied whenever the system is armed and/or dis-
armed.
When Will this Feature Be Active?
The Opening and Closing Reports feature can be
enabled only by the installer. There is nothing more
that the user needs to program in order to receive
the Opening and/or Closing pages.
If a pagerholder no longer wishes to receive the
reports, the pagerholder needs to contact the
installer to turn off this option for that pager.
Opening and Closing Reports occur without regard
to any time schedule. There are no special codes
that the user needs to enter in order for the page to
be sent.
Who Will Be Paged?
Your system can call up to 5 different pager num-
bers, as well as the central station, to report an
Opening and/or Closing Report.
Refer to the User Sheets in Appendix A to see
which pagers have been set up to receive a page for
this feature. Contact the installer if you would like
to turn Opening and Closing Reports on or off for
any programmed pager or for the central station.
What Will the Pager Report?
For Opening Reports, the page reports the arming
level (111 for 1—OFF) and the user code entered.
For Closing Reports, the page reports the arming
level as 222 (2—STAY) or 333 (3—AWAY), and the
user code that armed to that level.
See Table 1 in Section 10 for more information on
paging reports.
