11
4.
If the touchpad displays “INVALID” or the
Bypass LED does not light, make sure that
you entered a valid sensor number. Heat and
smoke sensors cannot be bypassed.
5.
Bypass other sensors, if necessary, by repeat-
ing Step 3.
6.
The bypassed door or window can now be
opened.
* You cannot bypass sensors directly using a
keychain touchpad.
Bypassing a Sensor Indirectly
Use this method if you are arming the system and
would like to bypass doors and windows already
open.
To bypass sensors
indirectly using an
alphanumeric or LED touchpad:
1.
Leave open only those doors and windows
that are to remain open. Close all others.
2.
Arm your system to the desired level.
The touchpad will emit protest beeps
because of the open sensor(s).
3.
At any touchpad:
Enter BYPASS
.
• Alphanumeric touchpads display,
“SENSOR 01 BYPASSED,” for example.
• On LED touchpads, the Bypass
LED
lights up.
4.
The system sounds arming level beeps to indi-
cate that the system is armed and open sen-
sors have been successfully bypassed.
Disarming the system will undo the bypassing.
When you arm the system again, those sensors will
arm.
To bypass sensors indirectly using a keychain
touchpad:
•
Press the Lock button once to arm the system
and again to bypass open sensors:
+
Was the Bypass Successful?
To confirm that a sensor was bypassed successfully
press the STATUS button on the touchpad:
• On alphanumeric touchpads, a list of bypassed
sensors is displayed.
• On LED touchpads, the LEDs of those bypassed
sensors flash for 2 or 3 seconds along with the
Bypass LED.
Basic Light Control
There are two kinds of light control:
•
Basic light control, offering instant light control at
any touchpad, and
•
Advanced light control, in which lights turn on
and off automatically according to specific situa-
tions. See “Advanced Light Control” on page 22.
To turn
all lights on or off:
•
From any touchpad:
Press
0
+
0
.
•
From a 4-button keychain touchpad:
Press
(the LIGHTS button).
To turn a
specific light on or off*:
•
From any touchpad, press
0
+ light number.
You cannot turn on a specific light using a keychain
touchpad.
* Refer to the User Sheets in Appendix A to determine
which light number is associated with which lamp.
5
1
6
2
7
8
3
4
NO DELAY
Enter Code
Power
Check
Status
Trouble
Bypass
Both Flashing
ALARM -
AWAY
STAY
For system lights to respond to
basic and advanced light com-
mands, the light switches must be
turned on.
