GE Interlogix KTD-405, User Manual

Page: 36 / 60

Operation KTD-405/405A User Manual
36 1036547C / December 2003
Control Function for DSR/VCR Function for DVMRe
Joystick
twisting right:
steps forward at a
variable rate
twisting left:
steps in reverse at a
variable rate
in play or pause mode
right:
fast forwards
left:
rewinds
up:
skips forward approximately 15 sec
down:
skips backward approximately 15 sec
twisting right:
steps forward at a variable rate
twisting left:
steps in reverse at a variable rate
return to center:
resumes pause mode
with 2X magnification on
right:
pans right
left:
pans left
up:
pans up
down:
pans down
5.2 Z
ONE
M
ODE
5.2.1 LCD N
ORMAL
S
CREEN
The LCD displays the zone number and title on the top line and the current camera and monitor numbers
on the bottom line:
ZONE -- ZONE TITLE
CAMERA -- MONITOR -
5.2.2 S
ELECTING A
Z
ONE
1)
Press
zone
2)
Enter a zone number.
The LCD displays the zone number and title, which is created during programming.
5.2.3 S
ELECTING A
C
AMERA
! Enter the camera number including any preceding zeroes (e.g., if you have tens of cameras, enter
01 for camera 1; if you have hundreds of cameras, enter 001 for camera 1), or
! Enter the camera number directly (omitting preceding zeroes), then press .
5.2.4 C
ONTROLLING A
C
AMERA
5.2.4.1 PTZ
Pan, tilt, and zoom are controlled by the joystick. Zoom is also controlled by the
+ zoom -
key.
To pan, move the joystick left or right. To tilt, move the joystick up or down. To zoom, twist the joystick
knob clockwise or counterclockwise.