GE Interlogix KTD-405, User Manual, Page: 24 / 60

Programming KTD-405/405A User Manual
24 1036547C / December 2003
The following access menus are used to restrict the keypad from addressing specified sites in the system.
Note:
The access menus enable you to allow access for each camera, monitor, DSR/VCR, and multiplexer. To move from one type
of access menu to another, press
!
or
"
.
CAMERA 000 ACCESS? YES
(+)=YES (-)=NO
"
NEXT
!
MONITOR 01 ACCESS? YES
(+)=YES (-)=NO
"
NEXT
!
Note:
If you do not want to interrupt viewing at another keypad, program the keypad to address only the monitors within its view.
DSR/VCR 01 ACCESS? YES
(+)=YES (-)=NO
"
NEXT
!
Pressing
+
displays the following menu:
VCR 01 MATRIX INPUT:
000 (0=NONE)
"
NEXT
!
The VCR output can be assigned an input number on the matrix switcher. When a VCR is called, the
matrix switcher switches to the assigned input.
Enter a number from 1 through 511, or enter 0 for NONE.
MPLX 01 ACCESS? YES
(+)=YES (-)=NO
"
NEXT
!
+ MPLX01 BRAND DVMRe DUP
(
!
,
"
)=SELECT
"
NEXT
!
–
!
Use
#
or
$
or the joystick to
scroll through multiplexer
manufacturers.
!
MONITOR OFFSET
NUMBER: 0
"
NEXT
!
MPLX 01 MATRIX INPUT?
000 (0=NONE)
"
NEXT
!
By default, the selected monitor number
corresponds to the number of the matrix switcher
output to which it is connected. For example, if
monitor 12 appears in the keypad’s display
window and a camera selection is made, the
monitor that is connected to output 12 of the
matrix switcher switches to that camera.
In some applications, you might prefer to have the
monitors numbered as 1, 2, 3, etc., instead of
using the matrix switcher output number. To do
this, subtract the desired monitor number from the
matrix switcher output number and enter the
difference as the monitor offset.
If the DVMRe/multiplexer’s output(s) is
connected to an input on a matrix switcher,
enter the input number (1 – 511, or 0 for
none).
SELECT MAX OUTPUTS: 02
(
!
,
"
)=SELECT
"
NEXT
!
Enter the number of outputs (1 – 5) connected
to the matrix switcher. This returns you to the
MPLX XX ACCESS menu.
Note:
Outputs must be connected in sequential order to
inputs if more than one output from a single DVMRe/mux
is used.