GE Interlogix KTD-405, User Manual

Page: 27 / 60

KTD-405/405A User Manual Programming
1036547C / December 2003 27
The following system access menus are used to restrict the keypad from addressing specified sites in the
system:
ZONE 1 CAM 01 ACC? YES
(+)=YES (-)=NO
"
NEXT
!
ZONE 1 MON 1 ACC? YES
(+)=YES (-)=NO
"
NEXT
!
ZONE 01 RECORDER ACC? YES
(+)=YES (-)=NO
"
NEXT
!
Note:
If you are using MMX or Triplex without a VCR attached through submacros, deny zone recorder access.
This menu returns you to the ENTER ZONE ADDRESS menu. From the ENTER ZONE ADDRESS menu,
you can program all zones. When you have finished programming all zones, pressing
!
from the ENTER
ZONE ADDRESS menu displays the following menu:
ZONE 01 ACCESS: YES
(+)=YES (-)=NO
"
NEXT
!
Pressing
+
or
–
enables you to allow or deny access for each zone.
Pressing
!
displays the following menu:
Note:
The following menu is for future use.
ANNUNCIATION? NO
(+)=YES (-)=NO
"
NEXT
!
When annunciation is enabled, the keypad displays the 1
st
, 2
nd
, and 3
rd
call-in/alarm on the LCD and
stores up to 32 call-in requests.
Pressing
+
and then
!
displays the following menu:
CALL TONE TYPE? MULTIPLE
(
!
,
"
)=SELECT
"
NEXT
!
In the annunciation mode, the keypad produces a tone on a call-in request or alarm. This sound can be
set to one frequency (single) or to warble between two frequencies (multiple).
SPOT MONITOR NUMBER: 0
(0=UNASSIGNED)
"
NEXT
!
When a spot monitor number is assigned, pressing the
1st
key displays the first site number in the
annunciation queue on the spot monitor, and the keypad automatically addresses control to that monitor.