Kalatel DVSe
14
0150-0178F
3.2 Power-Up
Select the correct voltage before supplying power to the unit. Use the voltage
selector switch located on the back panel of the unit, between the power
connector and the On/Off Switch.
Caution!
Applying incorrect voltage could damage unit.
Once the correct voltage has been selected and all connections have been
made, connect the power cable suited to your geographic location. Apply power
to the unit.
3.3 Setup Menu
The Setup menu provides setup options for the following features:
•
Ethernet enable/disable.
•
Bus Select: SCSI/1394
•
Auto Delete Mode.
•
IP Address.
•
Subnet Mask Address.
•
Default Gateway Address.
•
Date/Time Setup.
Menus will automatically be exited after 30 seconds of inactivity.
Access to menu is only allowed when the DVSe is Offline, i.e. the
DVSe is not presently archiving or connected via ethernet.
Press the
Enter Button
to access the first menu.
Ethernet Enable
Select ethernet enable, yes or no. Default
setting is no.
Bus Select
Select from SCSI or 1394 to enable. Default
setting is 1394.
NOTE
NOTE
