NOTICE
Lift the instrument in the upright position. Do not use the fraction-
ation arm as a lifting handle.
Before moving the system:
•
disconnect all cables and tubing connected to peripheral components and liquid
containers.
•
remove any loose items from the top of the instrument.
•
grasp the instrument firmly by placing the fingers under the base of the main unit
and lift.
For more information on transport, see
ÄKTAprime plus User Manual
.
3.3
Unpacking
Check for damage
Check the equipment for damage before starting assembly and installation. There are
no loose parts in the transport box. All parts are either mounted on the system or located
in the accessory kit box. If any damage is found, document the damage, and contact
your local GE representative.
Unpack the system
Remove straps and packing material. Then set the equipment upright before starting
installation.
3.4
Connections
Communication
Connect the system according to the electrical drawings in
Electrical and communication
connections, on page 10
.
30
ÄKTAprime plus Operating Instructions 28-9597-89 AC
3 Installation
3.2 Transport
