GDI COMMUNICATIONS Extreme Copper XC-RP300, Owner'S Manual

Page: 11 / 40

CONNECTING TO THE MANAGEMENT CONSOLE
Access to the management interface is through a rear panel, seven (7) pin mini DIN connector
“ref: Tyco 1445721-1 AMP/Tyco Micro CPC”. An adaptor cable is required to convert the mini
DIN connector to a typical 9-pin serial port connector on a PC. Figure 9 shows the pin
assignments for the console connector. The converter cable is described in figure 10. Contact
GDI Communications for availability.
The small switch located next to the console connector allows the user to connect to either the
Primary (PRI) or the Secondary (SEC) management port.
Figure 9 .
Console connector
CONSOLE ADAPTER CABLE
Generic FM-DA-9/Backshell
1
AMP/TYCO 1445642-1
with 1604111-1 Strain Relief
1 N/C
2 __________________________ 2
3 __________________________ 3
4 N/C
5 __________________________ 4
Figure 10.
Converter Cable Diagram
1
typical: PAN PACIFIC*DB9GH-50P, PAN PACIFIC*DH-9HS/T-P10, PAN PACIFIC*DHD-PIN/F-HR-P1C
7
Pin 1
Pin 2, TX
Pin 3, RX
Pin 4, GND