![background image](http://html1.mh-extra.com/html/gcx/lidco/lidco_installation-manual_3903191008.webp)
DU-LC-0002-60 Rev C 6/14/06 GCX Corp. Page 8 of 11
7.0 Mounting the PPC-150
,
POC-153
or POC-155
Platform on the Roll Stand
The PPC-150 platform requires a Mounting Adapter (provided) for mounting on the Roll Stand. The POC-153
and POC-155
platform have
a 75 x 75mm mounting pattern on the rear and only requires M4 x 20mm screws (provided) for mounting
on the Roll
Stand. Procedures for both
types of
platform are included in this section.
Parts Reference
The following parts and hardware are provided for this procedure:
Tools Required
Phillips screwdriver (not provided).
Mounting the PPC-150 Platform
1. Locate four (4) threaded mounting holes on rear housing (below left).
2. Fasten Mounting Adapter to PPC-150 with four (4) M4 x 10mm PHMS as shown below right.
Item #
Description
Qty
1 Mounting
Adapter
1
2
M4 x 10mm Pan Head Machine Screw (PHMS)
8
3
M4 x 20mm PHMS
4
Threaded Mounting Holes (4)
M4 x 10mm PHMS (4)
Mounting Adapter
1