![background image](http://html1.mh-extra.com/html/gcx/lidco/lidco_installation-manual_3903191004.webp)
DU-LC-0002-60 Rev C 6/14/06 GCX Corp. Page 4 of 11
3.0 Attaching the Power Outlet Strip
Installation Note:
The Power Outlet Strip is an optional accessory and may not be included with this Roll Stand Kit.
Parts Reference
The following parts and hardware are provided for this procedure:
Tools Required
Phillips screwdriver (not provided).
1. Fasten Front Clamping Block to threaded mounting holes on rear of Power Outlet Strip with two (2) #8-32 x 3/4'' PHMS
as shown below left.
2. Position Power Outlet Strip on Roll Stand Post and fasten Rear Clamping Block to Front Block with two #10-32 x 9/16''
PHMS (below right).
Item #
Description
Qty
1 Power
Outlet
Strip
1
2 Front
Clamping
Block
1
3
Rear Clamping Block
1
4
#10-32 x 9/16'' Pan Head Machine Screw (PHMS)
2
1
3
2
#8-32 x 3/4'' PHMS (2)
Front Clamping Block
#10-32 x 9/16'' PHMS (2)
Mounting Holes on Rear
of Power Outlet Strip