DU-LC-0002-60 Rev C 6/14/06 GCX Corp. Page 7 of 11
6.0 Attaching the Manual Tilt /VESA Mounting Plate Assembly
Parts Reference
The following parts and hardware are provided for this procedure:
Tools Required
Phillips screwdriver (not provided), 9/64'' hex wrench (provided).
1. Align Mounting Plate Assembly toward front of Roll Stand and fasten
to top of Post with three (3) #10-32 x 7/8'' FHMS as shown below.
Installation Note:
The Tilt Lever is a multi-position clamping lever
that operates by lifting, rotating, and releasing the handle.
2. Remove backing from black Screw Cover and press Cover over
screw heads as shown below center.
Item #
Description
Qty
1
Mounting Plate Assy.
1
2
#10-32 x 7/8'' Flat Head Machine Screw (FHMS)
3
3 Lever,
Tilt
1
4
Screw Cover, Black Lexan
1
5
9/64'' Hex Wrench
1
1
#10-32 x 7/8'' FHMS (3)
Screw Cover
